HomeWorks QS Hybrid Repeaters Беспроводной радиоретранслятор (HQQ REP)

HomeWorks QS Hybrid Repeaters

HomeWorksR QS Hybrid Repeaters add wireless Radio Frequency (RF) communication and extend the range of RF signals that are sent between dimmers, switches, keypads, visor control receivers, shades /draperies, and other devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems.

The first repeater connects to the HomeWorksR QS processor to provide RF communication that extends up to 30 ft (9 m) in every direction. Up to four (4) total Hybrid Repeaters can be used per link to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m) between repeater and devices or 60 ft (18 m) between repeaters, covering a total area of approximately 2500 sq ft (232 m().

Power

Hybrid Repeater: DC adapter: 9 V- 300 mA Link: 24 V- 50 mA

DC adapter: Input: 100-240 V~ 50/60 Hz 6.5 W Output: 9 V- 300 mA

Typical Power Consumption

Hybrid Repeater: 0.6 W Test conditions: one LED on, powered by a 9 V- adapter

Environment

Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only. Unit generates heat, maximum 4 BTU/hr

Communications

The first Hybrid Repeater communicates with the HomeWorksR QS processor on the RF wired link. Subsequent Repeaters may be wired on this link or may communicate over Radio Frequency (RF). All RF devices must be located within 30 ft (9 m) of a Repeater. All Repeaters must be within 60 ft (18 m) of another Repeater.

Connections

Hybrid Repeater: RS485

Mounting

Mount on a wall, ceiling, or level surface using the two #6 (M3) screws provided.